2-Belt Dryer Drying machine

Summary: The raw materials to be treated should be distributed on the conveyer belt through suitable mechanism, such as star distributor, swing belt, crusher or granulator. The conveyer passes through the channel consisting of one or several heating units. Each heating unit is equipped with air heat and circle system. Each channel has one or several damp discharge systems. When the conveyer passes through it, hot air will pass through the raw material from high to low, or from low to high. In this way, the raw materials can be dried evenly. Applications: The belt dryer is an ordinary continuous drying equipment. It is widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry and electronic industry. Especially, it is suitable for drying raw materials that are good in breath ability, and have the shape of pieces of strip of granule. It is also possible to dry the pasted raw materials, such as filter cake after shaping through granulator of extruder. Typical products: Dehydrated vegetable, granule feed, monosodium glutamate, check extraction, organic pigment, synthetic rubber, propylene fiber, medicine, medical materials, small wooden products, plastic products, aging or solidifying for electronic elements. Size Model DW-1.2-8A DW-1.2-10A DW-1.6-8A DW-1.6-10A DW-2.0-8A DW2.0-10A Quantity of unit 4 5 4 5 4 5 Width of drying belt(M) 1.2 1.2 1.6 1.6 2.0 2.0 Length of drying section(m) 8 10 8 10 8 10 Thickness of raw material layer(mm) ≤60Operation Temperature() 50-140Steam pressure(Mpa) 0.2-0.8Steam consume 120-300 150-375 150-375 170-470 180-500 225-600 Drying Time(h) 0.2-1.2 0.25-1.5 0.2-1.2 0.25-1.5 0.2-1.2 0.25-1.5 Drying rate(kg.H2O/.h) 6-30Installed Power 11.4 13.6 11.4 13.6 12.5 14.7